N18121 Interior Progress

Completed table installation 3/22/19
Completed table installation 3/22/19
Window-line panel with window bezel 3/22/19
Window-line panel with window bezel 3/22/19
Freshly painted reading lights 3/22/19
New flight deck headset holders with Bose Lemo and USB Charging 3/22/19
Completed heater installation 3/22/19
Testing heater operation 3/22/19
Testing heater operation 3/22/19
Testing heater operation 3/22/19
Installing the last two sections of seat track 3/22/19
Test Fitting First Seat 3/11/19
Test Fitting First Seat 3/11/19
Installing Seat Track 3/11/19
Installing Seat Track 3/11/19
Test Fitting First Seat 3/11/19
Test Fitting First Seat 3/11/19
Test Fitting First Seat 3/11/19
Fitting Window Bezel 3/9/19
Fitting Window Bezel 3/9/19
Heater Mounting Components Ready for Primer 3/8/19
Honeycomb Sandwich Panel for Bulkheads 3/8/19
Heater Fuel Flow Filters and Shutoff Valves 3/8/19
Fist Table Mounted 3/8/19
Test Fitting Window-Line Panels 3/8/19
Test Fitting Window-Line Panels 3/8/19
Creating False Bulkhead Pattern 2/27/19
Creating Lavatory Bulkhead Pattern
New Floor 2/21/19
New Floor 2/21/19
2.13.19 (4 of 14)
New Circuit Breaker Panel 2/13/19
2.13.19 (3 of 14)
New Circuit Breaker Panel 2/13/19
2.13.19 (5 of 14)
Seat Support Structure 2/13/19
2.13.19 (6 of 14)
Seat Support Structure 2/13/19
2.13.19 (7 of 14)
Seat Support Structure 2/13/19
2.13.19 (8 of 14)
Seat Support Structure 2/13/19
2.13.19 (9 of 14)
Seat Support Structure 2/13/19
2.13.19 (10 of 14)
Seat Support Structure 2/13/19
2.13.19 (11 of 14)
New Floor 2/13/19
2.13.19 (14 of 14)
New Main Electrical Feed 2/13/19
2.13.19 (12 of 14)
New Main Electrical Feed 2/13/19
2.13.19 (13 of 14)
New Main Electrical Feed 2/13/19
2.13.19 (2 of 14)
Heater Location 2/13/19
2.13.19 (1 of 14)
Heater Location 2/13/19
1.30.19 (1 of 2)
Heater 1/30/19
1.30.19 (6 of 6)
Heater 1/30/19
1.30.19 (5 of 6)
Heaters 1/30/19
1.30.19 (4 of 6)
Toilet 1/30/19
1.30.19 (3 of 6)
Toilet 1/30/19
1.30.19 (2 of 6)
Sub Floor Seat Support Position 3 1/30/19
1.30.19 (1 of 6)
Sub Floor Seat Support Position 4 1/30/19
1.28.19 (7 of 7)
Propellers Undergoing AD Corrosion Inspection 1/28/19
1.28.19 (1 of 7)
Galley Frame Test Fit 1/28/19
1.28.19 (2 of 7)
Floor Intercostal Seat Support Installation 1/28/19
1.28.19 (3 of 7)
Floor Intercostal Mount Pad 1/28/19
1.28.19 (4 of 7)
Floor Intercostal Mount Pad 1/28/19
1.28.19 (5 of 7)
Repaired Valence Duct 1/28/19
1.28.19 (6 of 7)
Main Generator Feed Wire Removed for Replacement 1/28/19
1.28.19 (1 of 1)-4
Cabin Seats 1/21/19
1.28.19 (1 of 1)-3
Valance and Heater Ducts 1/21/19
1.28.19 (1 of 1)-2
Main Aircraft Electrical 1/21/19
1.28.19 (1 of 1)-5
Valance Planning 1/15/19
1.28.19 (1 of 2)
Valance Repair 1/15/19
1.28.19 (2 of 2)
Valance Repair 1/15/19
1.28.19 (1 of 2)-2
Complete Bulkhead 1/5/19
1.28.19 (2 of 2)-2
Complete Bulkhead 1/5/19
12.21.18 (2 of 5)
Aft Cabin Bulkhead Door – 12/21/18
12.21.18 (3 of 5)
R/H Valance Duct – 12/21/18
12.21.18 (4 of 5)
Galley Drawing – 12/21/18
12.21.18 (5 of 5)
Galley and Lavatory Drawing – 12/21/18
11.14.18 (4 of 5)
New RH Heater Duct 11/14/18
11.14.18 (3 of 5)
New Baggage Bulkhead Getting Installed 11/14/18
11.14.18 (2 of 5)
New Lavatory Window 11/14/18
11.14.18 (1 of 5)
New Baggage Bulkhead Getting Installed 11/14/18
9-6-18 (6 of 18)
Seats from N855SA in Cal City 9/3/18